Chalmers Open Digital Repository
Välkommen till Chalmers öppna digitala arkiv!
Här hittar du:
- Studentarbeten utgivna på lärosätet, såväl kandidatarbeten som examensarbeten på grund- och masternivå
- Digitala specialsamlingar, som t ex Chalmers modellkammare
- Utvalda projektrapporter
Forskningspublikationer, rapporter och avhandlingar hittar du i research.chalmers.se
Enheter i Chalmers ODR
Välj en enhet för att se alla samlingar.
Visar 1 - 2 av 2
Senast inlagda
Post
Noise reduction of mine and tunnel ventilation; investigations on scale models and methods to determine noise reduction
(2023) Arand, Sally; Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Kropp, Wolfgang; Lundberg, Oskar; Rantakokko, Renny
Ventilation systems used in mines and tunnels contain big axial flow fans, which
dominate the sound environment together with the noise generated from heavy machinery.
To fulfil the demands regarding work-placement and environmental regulations and with
increasing awareness of noise induced health issues, the reduction
of the emitted sound is investigated in a thesis project with practical measurements
and simulations.
To do fast investigations a scale model of the ventilation system was designed. The
fan scaling laws, which are used to scale fan properties between different fan sizes,
showed, that by reducing the fan size and the rotational speed the fan performance
will decrease highly. The resulting effect on the flow properties is rather small. The
blade passage frequency will change, which leads to a change in the acoustic similarity.
CFD simulations were performed in Comsol Multiphysics 6.1 to investigate
the pressure and velocity field closely over a perforated plate and around a centrumbaffle,
which are both part of the silencer of the ventilation system. The results
showed a laminar-sublayer close to the wall and an increase in the fluctuations of
the velocity and the pressure in the flow duct when adding the centrum-baffle.
In the practical part of the thesis the silencer of the ventilation system was scaled
and its acoustic properties were determined with measurements. The transmission
loss measurement methods were compared by using the two room method with
microphones and a sound intensity probe. Both methods showed similar results.
Insertion loss and level difference were measured in another setup. Overall there
was no big difference between the silencer characteristics measured from the different
methods. It was found that the most effective reduction is brought from the
absorption material. The perforated plate does not add to the noise reduction.
At last an acoustic simulation for the silencer was set up in Comsol to investigate
the transmission loss of the silencer further. Due to limitations in computational
resources, the model is restricted to plane wave excitation, which limits the accuracy
of the model and the possibility to directly compare the measurements with
the simulation results. But both show the most effect due to the absorber and no
added reduction by the perforated plate.
Post
Speech enhancement for non-stationary noise around a machine cabin
Zhou, Yiliang; Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Ahrens, Jens; Frenne, Nicklas
This thesis is mainly concerned with the solution for speech enhancement in the
presence of non-stationary noise around the machine cabin. This allows outside
speech to enter the cabin and reduces unwanted noise. The application scenario
of this work is a signal processing system using a microphone array outside the
cabin to capture signals and using different algorithms to enhance the speech signals.
With the help of this system, the machine operator is able to get speech
information in a noisy environment. The noise sources in this situation are more
complex and non-stationary. Examples of noise sources include engine noise, traffic
noise, or other construction activities. Previous work done by Tomoya chose the
microphone array configuration and developed the beamforming method. From the
results of the valuable work, it is found that beamforming is able to increase the
signal-to-noiseratio (SNR) in the current situation, but the sound quality and SNR
are still limited due to the low input SNR and non-stationary noise environment.
Therefore, modified beamforming and new methods are implemented in this work.
noise cancellation(NC) predicts the transfer path for the noise signal and removes
it by controlling the minimum error of the output. Noise suppression(NS) uses the
scheme of spectral subtraction to subtract the noise spectrum from noisy speech
spectrum. A combination of beamforming and noise cancellation and a combination
of beamforming and noise suppression method are developed and evaluated. The
result shows a better performance for this low input SNR and non-stationary noise
case.
Post
Enlargement of perceived size of sound source using diffusive geometries
(2024) Xu, Zhiwen; Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Ahrens, Jens
Interaural cross correlation, which quantifies the similarity of binaural signals, is essential for
immersive and rendered auditory environment. Previous research has proven that reducing
interaural correlation leads to expansion of perceived size of a source. The Schroeder diffuser
is a prevalently used acoustic design to create pleasant acoustic environment since it was
firstly developed. It helps to eliminate many acoustic problems in many scenarios through
scattering waves in multiply directions. In this work, the Schroeder diffuser is employed to
manufacture natural sound field with reduced interaural correlation so that models of source
enlarger can be studied further.
To explore the properties of the sound field of the Schroeder diffuser, the produced sound
field is simulated and a method of representing the sound field with circular harmonic expansion is
applied. The characteristics of the sound field of the Schroeder diffuser are investigated to discover their
connectivity with low interaural correlation in order that any other arbitrary sound field can be
manipulated to achieve it. In light of such discovery, two models of simple sound fields which
are impulse field and plane wave field are utilized to produce the sound field with low interaural
correlation with proper modification engaged. These simple models are capable of saving
computational cost as simulating the Schroeder diffuser is pretty resource and time consuming.
Post
Unified Auralization of Room Simulations; Investigation of sampling grids and other parameters
(2024) Xuanye, Liu; Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Chalmers tekniska högskola / Institutionen för arkitektur och samhällsbyggnadsteknik (ACE); Ahrens, Jens
With the development of computer science and the increase in computing power,
the finite-difference time-domain method has gradually become a viable option for
solving wideband, transient problems in acoustics simulation. In this method, the
binaural response can be extracted by local sampling of the finite-difference grid
using an array of receivers. This thesis focuses on the effects of the grid size, the
spacing of grid points, and the distribution of grid points in the case of a volumetric
sampling. This thesis also investigates the effect of the change in impulse response
length and others. These effects include variations in numerical robustness and the
frequency properties of the generated audio signal. In order to achieve this study,
this thesis simulates the sound field formed by a single plane wave propagation. By
sampling this sound field with a volumetric grid, the plane wave density function
is calculated using the plane wave decomposition method and integrated with
free-field head-related transfer functions in the spherical harmonics domain to get the
binaural impulse response. The results of the valuable work show that the numerical
stability of a volumetric grid with uniformly distributed sampling points is greatly
affected at high frequencies due to spatial aliasing. In addition, the results also give
some valuable conclusions for the selection of the impulse response length and the
selection of the number of sampling points.
Post
Mechanical design of gear train efficiency test rig - Efficiency evaluation of geared front attachments in industrial tightening tools
(2024) Shin, Miranda; Chalmers tekniska högskola / Institutionen för industri- och materialvetenskap; Chalmers University of Technology / Department of Industrial and Materials Science; Melkersson, Kjell; Forsberg, Per
Atlas Copco desires a test rig where they can perform gear accuracy and efficiency tests with the aim of potentially enhancing the performance of their Geared Front Attachment (GFA) tool tightening solutions. The GFA extension consist of several gears positioned on a row making it possible to perform tightening’s in difficult positions. This project involves the mechanical design and assembly of a gear test rig that the company can leverage for future GFA development assessments. The degree project includes Computer Aided Design (CAD) design drawings of the rig and explanation of component selection necessary to assemble and operate the gear train test rig. The development process of the gear train test rig will be documented and discussed with regards to functionality, tolerance and fit, manufacturing, assembly, and maintenance. The project is divided into three phases, the design and construction phase, the assembly phase, and the test phase.
The final design of the gear train test rig consists of several gear modules, allowing flexibility in adjusting the number of gear steps based on the operator's testing requirements. Each gear module is clamped onto a T-slot aluminum plate. The input and output modules are placed in the beginning and at the end of the test rig gear train. The input module is connected to the power source and the output module is connected to the system pneumatic brake. The gear steps can easily be set and rearranged by changing the number of middle modules incorporated to the gear train test rig.
To validate the functionality of the assembled test rig, grease test cases have been conducted. Research indicates that power losses occur during gear meshing because of friction between interlocking gear teeth, which in this case will impact the gear test rig efficiency. Studies show that lubrication applied to gears can improve tool performance significantly (Westbroek, Leckner & Olsson, 2023). Test cases were conducted both with no applied grease on gears and with two different greases applied to the gears. These test cases validate the test rig's performance and the effects of different lubrication conditions. The conclusive test results reveal that the comparison between the two different greases did not show any significant difference, although applying grease to the gears enhances the test rig efficiency by nearly 19 %. The conclusive assessment of the constructed test rig's performance reveals that the rig will operate with a 95 % efficiency during two-gear-step test cases.