Skapa referens, olika format (klipp och klistra)
Harvard
Forsgren, L. (2016) Development of an Injection Molded Boot Adapter. (Diploma work - Department of Materials and Manufacturing Technology, Chalmers University of Technology, nr: ).
BibTeX
@mastersthesis{
Forsgren2016,
author={Forsgren, Lilian},
title={Development of an Injection Molded Boot Adapter},
abstract={A boot adapter is an injection moulded polymer component intended to isolate a spark plug in a combustion engine used in heavy vehicles. The boot adapter failed too fast
either by cracking or electrical puncture and there were large variations of quality among the produced parts. The aim of this project was to reduce or eliminate the risk
for the early function failure of the part by finding the cause of failure and developing effective, easy methods for quality assurance. From gathering data and information
from previous testing and employees at the company, a number of hypotheses were set and the most probable once was evaluated through a failure analysis. To find a
correlation between an easily measurable parameter and the performance of the piece, a number of tests were preformed where the investigation regarded how the weight of
the boot adapter corresponded to its performance both thermally and electrically.},
year={2016},
series={Diploma work - Department of Materials and Manufacturing Technology, Chalmers University of Technology, no: },
keywords={materials engineering, plastics, PPS, injection moulding, high volage applications},
note={44},
}
RefWorks
RT Generic
SR Electronic
ID 241123
A1 Forsgren, Lilian
T1 Development of an Injection Molded Boot Adapter
YR 2016
AB A boot adapter is an injection moulded polymer component intended to isolate a spark plug in a combustion engine used in heavy vehicles. The boot adapter failed too fast
either by cracking or electrical puncture and there were large variations of quality among the produced parts. The aim of this project was to reduce or eliminate the risk
for the early function failure of the part by finding the cause of failure and developing effective, easy methods for quality assurance. From gathering data and information
from previous testing and employees at the company, a number of hypotheses were set and the most probable once was evaluated through a failure analysis. To find a
correlation between an easily measurable parameter and the performance of the piece, a number of tests were preformed where the investigation regarded how the weight of
the boot adapter corresponded to its performance both thermally and electrically.
T3 Diploma work - Department of Materials and Manufacturing Technology, Chalmers University of Technology, no:
LA eng
LK http://publications.lib.chalmers.se/records/fulltext/241123/241123.pdf
OL 30