In English

PLL Design at 5.8 GHz

Biddut Banik
Göteborg : Chalmers tekniska högskola, 2003. 66 s.
[Examensarbete på avancerad nivå]

PLL (Phase Locked Loop) with low phase noise is a prerequisite for a communication system. Besides serving the general purposes as in cell phones, PLL is used in the ISM Bands for other special purposes incorporated with other devices. A double-PLL, generates two signals, at the ISM Band 5.8 GHz can be used for many purposes. ETC (Electronic Toll Collection), Traffic Control, thickness measurement are some examples that use ISM bands. The project’s aim is to investigate and design a Double PLL at 5.8 GHz which can be used as a part of the system that would measure the thickness of slag in an Iron furnace. Further investigation and design should take place as per necessity. The components used, should hold pronounced commercial perspectives and availability. Based on the investigation results, proper components were selected to design a Single PLL at 5.8 GHz which was followed by a Double PLL at 5.8 GHz. Further investigations were conducted to attain information about commercially available VCOs, followed by a feasibility study of the commercial perspectives. Detailed considerations regarding VCOs led to the way to design VCOs at 5.8 GHz and 9.9 GHz.

Nyckelord: microwave, signal generation, PLL, double PLL, ISM Band



Publikationen registrerades 2006-10-16. Den ändrades senast 2013-04-04

CPL ID: 22820

Detta är en tjänst från Chalmers bibliotek