In English

Avvikelsemätning av bergborrhål: En prototypimplementering med noggrannhetsanalys

Deviation measurements for bedrock boreholes: a prototype implementation with accuracy analysis

Jonas Forssell
Göteborg : Chalmers tekniska högskola, 2015. 98 s.
[Examensarbete på avancerad nivå]

The aim of my graduate project has been to evaluate the use of static accelerometers that measures static acceleration, and use of magnetometers for borehole deviation measurements. This has been done by evaluating the required accuracy for the measurement system, and building of a prototype that has been tested. The evaluation shows that it is hard to reach an accuracy that is better than ±0.1° for inclination and ±0.5° for azimuth, which were the requirements. The error in azimuth measurement is highest when the borehole is near vertical. This is explained by the offset errors in the sensors for the determination of the probe rotation. The evaluation shows that it is difficult to reach the accuracy requirements given the other constraints. In addition the probe dimension, environment, power supply and data transmission prove to be challenges.

The report is written in Swedish.

Nyckelord: borehole deviation, borehole logging, well logging



Publikationen registrerades 2015-06-12. Den ändrades senast 2015-06-12

CPL ID: 218307

Detta är en tjänst från Chalmers bibliotek