In English

Acoustical improvements in Kulturhuset Oceanen using slitted low frequency absorbers

Mattias Davidsson
Göteborg : Chalmers tekniska högskola, 2006. 52 s. Examensarbete - Institutionen för bygg- och miljöteknik, Chalmers tekniska högskola; 2006:18, 2006.
[Examensarbete på avancerad nivå]

The task was to improve the acoustic properties in the concert hall at Kulturhuset Oceanen. Measurements showed that the main problem was related to resonance frequencies around 70 and 110 Hz. There was also a peak at 40 Hz, but since the P.A. system does not excite such low frequencies, it was left without any consideration. The other two strong peaks were treated with slitted Helmholtz absorbers. The actual project did not include mounting of the full-scale absorbers; instead a prototype was constructed and built for experimentation and measurements in a reverberation chamber at Chalmers.The measurements showed that the absorber worked very well within the targeted frequency range, that is around 70 to 110 Hz. Since the absorber is mainly consisting of wood, it will also have higher absorption coefficients in the high frequency region, compared to the concrete walls that now are exposed in the concert hall. This implies that there will be a reduction of the reverberation times in the upper frequencies as well. Measurements on the prototype, together with simulations in CATT-Acoustic show a possible reduction of the reverberation time at the 125 Hz octave band with about 0.2 -0.3 seconds.

Nyckelord: resonance frequencies, slitted Helmholtz absorbers, octave bands, absorption coefficient, CATT-Acoustic, Schroeder backward integration, room acoustics, least squares methods, MLSSA

Publikationen registrerades 2006-08-25. Den ändrades senast 2013-04-04

CPL ID: 19166

Detta är en tjänst från Chalmers bibliotek