In English

A sensorless induction machine drive - An implementation study

Håkan Carlsson ; Johan Bergerlind
Göteborg : Chalmers tekniska högskola, 2006. 55 s.
[Examensarbete på avancerad nivå]

This Master’s thesis describes a DSP implementation of the Statically Compensated Voltage Model (SCVM) algorithm for sensorless induction machine control. The algorithm is aimed to be implemented in a 16-bit fixed-point processor. In general, low speed operation with voltage model based control systems is problematic, especially when in generator mode. In generator mode with the load at nominal torque, the implemented design fails already at 7.5 Hz. With a lower load, 2 Nm or 54 % of nominal, the drive is able brake it to almost zero, but the speed accuracy is low. On the other hand, if the motor operates in motor mode, low speed is less problematic. Experiments show that this implementation can handle variations in stator resistance from -37 % up to +60 % with stable low speed operation and variations of at least ±60 % at nominal speed. Stable operation for all speeds is possible even during an increase of rotor resistance by 60 %, but the speed accuracy will be reduced by approximatly 2 %. The rotor resistance may decrease by 58 % at low speed and by 53 % at nominal speed before the drive destabilizes. The total leakage inductance can vary at least ±30 % without noticeably affecting the system. The thesis project is conducted in association with Aros electronics AB.



Publikationen registrerades 2013-02-27. Den ändrades senast 2013-04-04

CPL ID: 174192

Detta är en tjänst från Chalmers bibliotek